Color rubber plastic board

Product Introduction

The plate-like structure can customize the color of the rubber and plastic according to customer needs. The special process is used to integrate the pigment into the rubber and plastic to meet the customer's needs in terms of aesthetics and convenient distinction (for example, distinguishing between water outlet and return water).

It is made of NBR/PVC as the main raw material, with flame retardants, foaming agents, curing agents, accelerators, stabilizers, enhancers and other additives, and is made through end spacing, mixing, extrusion, curing, foaming, cooling and cutting. It has a small independent closed-cell structure, good thermal insulation performance, good compression resilience, strong resistance to water vapor penetration, good fire resistance, low smoke and non-toxicity, safety and reliability, and long service life.

Product Performance

Application

It is suitable for commercial air-conditioning hosts, computer rooms with many types of pipes, and other places.

40-80kg/m³

Operating temperature

Initial thermal conductivity 0.032W (MK) 0°C WINCELL rubber plastic adopts a special formula process and has a completely closed bubble internal structure. The thermal conductivity is lower and more stable, and the energy saving effect is obvious in long-term operation.

Thermal conductivity

≤0.030 at -20℃

-50℃-110℃

density

Better insulation effect

Better insulation effect

Obtained CQC certification. Its product combustion performance reaches GB8624 standard B1 (additional level: smoke S2, burning feces D0, smoke toxicity T1), which is the confidence guarantee for customers to choose Ying Rubber and Plastic.

Longer service life

Moisture resistance coefficient μ≥10000 WINCELL rubber-plastic fully enclosed foam structure can effectively prevent the penetration of external water vapor, ensure the long-term stability of the material's physical properties, and extend the service life of the product in various environments.

Easier installation

Wide range of applications, easy installation, short construction period, high efficiency and more economical!

Technical Parameters

Color rubber plastic board

Performance Project
Technical Parameters
Implementation Standards
Apparent density Kg/m³
40-80
GB/T 6343 Standard
Thermal conductivity W/(m·k)


≤0.030 at -20°C; ≤0.032 at 0°C; ≤0.037 at 40°C

GB/T10294 Steel Pipe


Moisture permeability coefficient g/(m·s·Pa)
≤1.31x10^-11
GB/T17146 Steel Pipe
Wet resistance factor
≥10000
GB/T17146 Steel Pipe
Vacuum water absorption %
≤8
GB/T 17794
Combustion performance
B1 level (B level - s2, d0, t1)
GB 8624
Combustion smoke toxicity
ZA3 safety level
GB/T20285 Specification
Dimensional stability %
(105°C±3°C,7d)≤10
GB/T 8811 Standard
Compression rebound rate%
(Compression rate 50%, 72h) ≥70
GB/T6669 Wire Mesh
Anti-aging 150h

Slightly wrinkled, no cracks, no pinholes, no deformation

GB/T 16259 Standard
Applicable temperature range °C

-50~110

GB/T 17794